Auto Paintless Dent Removal Kit – Adjustable Paintless Dent Repair Tool for Auto, Motorcycle, & Metal Surfaces, Complete Car Dent Puller kit Quick Fix for Small & Large Dings, Hail Damage

PAINTLESS DENT PULLER KITDid you want to buy a paintless dent repair kit/ dent puller for the small det but at the same time you also need to repair the big one?Did you want to buy a the golden dent lifter which can adjust the width just for the more biger dent?Did you want to buy a dent remover kit which have the professional sticky glue sticks while did not separation from the damage during repair ?This will be your best choice !!!Durability Material Industry-specific High strength aluminum, clean with alcohol before use and after repair and design allows for perfect positioning and superior adherent extractor.ProfessionalThis Golden Dent Lifter add to the adjustment function. Just adjust the space between the two legs of the dent lifter according to the size of the dent ,adjust the length of the centra bar according to the depth of the dent.ProtectiveAll of 58 size Glue Puller Tabs have a new design on the face, golf ball dimple design allows for maximum surface area without sacrificing the ability to remove the glue after use,the original paint will be protected in the greatest degree.Wide Range of ApplicationsIt is suitable for the dent of all kinds of flat metal ,such as the surface of automobile metal plate and the washing machine's metal plate.Using Guide:How to use the dent repair kit?(Suit for dent&ding and home DIY repair)Step 1: Clean the dent surface with a clean wet cloth.Step 2: Put the glue sticks into the glue gun,connect and open the power switch to preheat for 3-5 minutes.Step 3: According the car dent size to choose a suitable glue puller tab, generally the size of tab should be smaller than the dent.Step 4: Apply enough glue to the selected puller tabs, place the pull tab in the center of the dent immediately and press lightly for a while until the label sticks.(Cooling time depending on the temperature of environment, it should be longer in summer and slightly shorter in winter,usually need 5-10 minutes.The cooling time should be less than 10 minutes.)Step 5: After the glue cooling,align the hole at the center of the golden dent lifter to the firmly sticked gasket,adjust the height and width of the dent remover (rotation the buttons can adjust the height,find a perfect place for the dent puller),then press the handle puller to pull up the dent.Step 6: Repeat the above steps until dents pop up.Step 7: After removing the car dent, use 95% alcohol(not included in the kit) or special glue remover(not included in the kit) to clean the residual glue which on the car body with a plastic shovel.Packing List:1 X Golden Dent Lifter1 X Bridge Dent Puller1 X 3-in-1 Slide Hammer1 X Big Suction cup1 X Small Suction cup58 X Dent Puller Tabs1 X Hot Melt Glue Gun(100W)5 X Yellow Glue Sticks5 X Black Glue Sticks10 X Trim Removal Tools1 X Rubber Hammer1 X Tap down pen （with 9 Tap down heat）1 X Plastic Shovel1 X Empty Alcohol Bottle1 X Clean Cloth1 X Instruction1 X Tools BagNotice:Do not use this dent removal kit under the following conditions:Cracks have been appeared on the body paint;The body paints is not the original paint, peeled off or damaged;These dent puller tools are mainly used for repairing various dents on the metal surface, cannot use for the plastic surface.Tips on how to operate the dent pullerThe spacer should be attached to the bottom of the depression, not to the wall of the depression, otherwise it will be easy to be unglued. The puller tab is a plastic spacer, which has no suction.;The spacer can not tilt pull, otherwise it will be easily unglued.If the dent is large, do not stick the spacer directly in the middle of the dent, but from the concave edge to the middle of the operation.

• Paintless Dent Repair – Professional Design: Our Paintless Dent Repair (PDR) kit uses advanced technology to safely remove dents. Featuring an adjustable design, it is perfect for repairing both small dings and larger dents. Made from premium materials, this kit ensures a flawless repair without damaging your vehicle’s original paint.
• Complete Kit: This all-in-one repair kit contains everything you need for professional-level dent removal at home. It includes a dent puller, suction cups, a pulling bridge, and heating glue sticks for quicker and more effective repairs. The kit is adjustable to suit various needs—glue sticks soften the dented area for easier repair, while the dent puller allows for width and height adjustments to tackle different types of dents.
• Multi-Scenario Functionality: This dent removal kit is not just for cars; it is also suitable for motorcycles, refrigerators, washing machines, and other metal surfaces. Its multifunctionality makes it an essential tool for all metal surface dent repairs, perfect for home use.
• Easy to Use: Designed for DIY beginners and everyday users, this kit is easy to operate. Step-by-step instructions guide you through each stage: attach the suction cup, apply glue, and carefully pull the dent using the dent puller. No prior experience is needed—this is the perfect solution to avoid expensive repairs at a shop.
• Save Time and Money: No need to visit a repair shop! With our easy-to-use dent removal kit, you can save time and money. Perform repairs at home without the hassle of scheduling or paying costly repair fees. In just a few hours, your car will look brand new. For DIY car owners who want to maintain their vehicles without spending a fortune, this is a smart investment.